Integrated circuit and system design for renewable energy inverters

This study proposes that a novel integrated circuit (IC) and system design for renewable energy inverters can harvest renewable energy to power direct current (DC) and alternating current (AC) loads. In addition, an intelligent synthesis and management tool is developed to design the proposed system and to judge the system’s operational maintenance decisions. Finally, a renewable energy inverter’s information is posted to an online system. Users can obtain the proposed system’s information at any time and place. The accurate and superior performance of the proposed IC and system is confirmed by computer simulations and experimental results.     

基于DSP的电子行走辅助系统的设计与实现

为帮助视障者独立行走，基于DSP设计一套电子行走辅助系统。介绍系统的功能和基本结构，详细描述各模块的硬件设计和系统软件工作流程。该系统以实时图像处理为基础，能够完全脱离 PC机实现视频图像的采集、处理和语音提示等功能，帮助视障碍者独立行走。该系统具有小巧、便携、使用方便的特点，与传统助盲设备相比提高了导盲精度，与大型电子盲道或全球定位系统相比节省了成本，实验验证了其有效性。     

同频段混合信号中的无人机信号盲检测识别

无人机信号的探测识别技术是应对无人机黑飞滥用的关键技术之一。在实际信号监测环境中，经常会接收到多个信号的混合信号，它们在时域和频域上混叠且各信号分量调制样式相同。为解决在同频段混合信号中检测识别出无人机信号的问题，提出了一种通过谱特征分析判断无人机信号存在性的方法。分别采用基于二次方谱特征的无人机图传和WiFi混合信号检测识别算法以及基于频谱带宽特征的多无人机混合信号检测识别算法，通过对射频电路采集的信号进行仿真验证，实现了从同频段混合信号中检测识别出无人机信号分量。理论分析和实验测试结果证实了所提检测识别算法的有效性。     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

A high efficiency input/output magnetically coupled interleaved buck–boost converter with low internal oscillation for fuel-cell applications: Small signal modeling and dynamic analysis

Dynamic behavior of DC–DC converters plays a crucial role in stability of renewable energy exploitation systems. This paper presents small signal modeling of an input/output magnetically coupled interleaved buck–boost converter for fuel-cell applications to help the designers with the better understanding of converter dynamics. Aiming to have a continuous converter transfer function for a smooth transition between the operation modes and an improved inner dynamics, a damping network and an input/output coupling have been added to the interleaved structure of well-known cascaded buck–boost converter. Having the same step-up/step-down voltage transfer ratio, smooth transition and improved inner dynamics make this converter quite suitable for renewable energy applications. The paper presents a small signal ac equivalent circuit model of the proposed converter based on state space averaging (SSA) method. Simulation results show remarkable improvements in converter dynamic behavior in both time and frequency domains. Prototype setup of 360 W and 36 V output voltage for a fuel cell with a brand of “FCgen 1020ACS” Ballard Power Systems, Inc. was implemented. Experimental results are presented to verify the theoretical model and its expected merits.     

Condition assessment for automatic tool changer based on sparsity-enabled signal decomposition method

Automatic tool changer (ATC) is one of the key basic parts in CNC machining centers, and the globoidal indexing cam and the groove cam are the functional units for tool changing. Thus the condition monitoring is important for highly efficient and precision machining. In this paper, a condition monitoring system is constructed for the ATC, especially for the globoidal indexing cam, including vibration signal acquisition, fault feature extraction and localization, and condition assessment. In the constructed system, sparsity-enabled signal decomposition method is introduced to extract transient component and reduce noises in the complex vibration signals, and the transient component is always a key feature for fault localization. Simulation study shows that the sparsity-enabled signal decomposition method is effective in transient feature extraction. The experimental application in condition assessment for the ATC demonstrates that the constructed condition monitoring system has the potential to assess the working condition of the ATC in practical application.     

山西沁水盆地3号煤层水平井施工技术探究

近年来,建设单位在山西沁水盆地郑庄区块部署较多的煤层气水平井,目的层为3号、15号煤层气储层,施工中受技术及地层因素的影响,多次出现煤层顶板坍塌、卡钻甚至埋钻事故,严重地影响了钻井效率,造成极大的经济损失。针对施工中存在的技术问题,采用无线随钻仪器双伽马技术来控制施工轨迹沿煤层夹矸钻进的方法来指导施工,通过对仪器电信号数据的充分辨识和利用,基本摸清了煤层赋存形态及结构,控制了施工轨迹;采用多种方法进行通井、遇阻划眼,确保井眼圆滑通畅。取得了快速、安全、高效的施工效果,达到了顺利完井的目的,解决了该区块水平井施工的技术难题,对该区水平井的施工具有指导意义。     

基于曲轴扭振信息识别的柴油机失火气缸判别方法

为解决柴油发动机在高转速、低负荷工况下难以准确判断出发生失火故障的气缸的问题,提出了通过检测曲轴转速信号中的扭振信号起始点来判定失火气缸的故障诊断方法。该方法首先通过分析单缸失火时的转速信号以确定曲轴扭振的自由频率,然后基于该频率构造正弦检测信号,将该检测信号与各缸做功转角范围内的转速信号做内积运算,并得到的内积值作为失火气缸的指示特征。在6缸柴油机上的失火试验证明该方法能够在高转速低负荷情况下准确识别发动机的单缸失火和两缸失火,弥补了传统失火诊断方法工况覆盖率低的不足。     

基于NI-PXIe的矿用通风机滚动轴承振动信号采集系统设计

针对矿用通风机滚动轴承振动信号部件采集需求,设计了一种基于LabVIEW软件以及NI-PXIe硬件的振动信号采集系统。系统硬件部分由PXIe1082机箱以及PXIe4492数据采集卡组成。以LabVIEW为开发软件完成了系统软件部分的设计。利用该系统进行了轴承振动信号采集试验,试验结果表明,系统能够稳定、高效地对轴承振动信号进行采集,具有一定的实用价值。